Log in to post
|
Print Thread |
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Jan 2013
Posts: 1,318
Expert
|
OP
Expert
Joined: Jan 2013
Posts: 1,318 |
OK....I'll try to be clear.
I got a new m/board/Mem/CPU for the DAW. (Windows 7.0)
I' confident all hookups are correct: power cables/SATA drive C:/CPU/fan, etc.
I can get to CMOS, see the C: drive and it's the correct boot up drive in CMOS
I get the prompt "Windows was unable to start" Did the repair option (recommended) and no luck after several attempts.
It occurred to me: 1) Is it possible that Windows won't start because some some authorization issue and that my Window 7.0 doesn't accept the new m/b? Do I need to put in my Win 7.0 CD to allow some reauthorization on a new m/b?
2) Is it possible that one has to clear the BIOS with that little jumper on the m/b.
I've been through some real time consuming frustration with this upgrade and my neurons are fried. So, if any of you read this novel and can offer some G2 I'll thank all in advance.
Hope that makes sense.....later....I need a drink.
Last edited by chulaivet1966; 11/16/16 01:29 PM.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Jul 2000
Posts: 26,685
Veteran
|
Veteran
Joined: Jul 2000
Posts: 26,685 |
I believe it's not any of the choices you gave. Windows will probably object to changing that much of your hardware, but you will be in Windows when it does so and asks for you to get authorization from Microsoft. I've done that a few times, and it's a fairly quick phone call.
A few thoughts in no particular order:
I don't think the BIOS settings would do that if your new hardware is the right type (for example, not using a PCI card when the new motherboard wants PCIe, or a CPU of the wrong socket type), but I agree, that would be something to try: clear the BIOS. Problem is, the new motherboard is the source of the new BIOS settings and should allow you access to the new hardware.
Does it beep when booting? Does the motherboard have a 2-character alphanumeric code it displays? Knowing the motherboard maker and the codes can help a lot. For example, three beeps usually means to check memory etc. On mine, A0 is the correct boot code displayed.
Is it possible you did not connect the second power supply cable to the motherboard? Common mistake.
Is it possible you have too much power draw for your old power supply? To test that, unplug all disk drives, DVD drives etc. except your boot drive.
Could one or more of the new components be defective? Do you have other parts to switch in one at a time for diagnosis?
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Jan 2013
Posts: 1,318
Expert
|
OP
Expert
Joined: Jan 2013
Posts: 1,318 |
Hey Matt....
My buddy (bass player) get the new system H/Ware for me and it came in this morning. It's new power supply too....Antec 600 watts. New memory and CPU verified compatible with m/b.
He also sent me a newly purchased (1) Terrabyte HD f Win 7.0 Professional (CD included) and it WILL boot to that drive which is the one he used to set everything up prior to sending the system to me.
But...I have all my music stuff on my original DAW C: drive so that's the one I want to use and my clone the (1) terrabyte at a later time.
I'm not hearing any beeps so I'll have to check that out.
Hmmm...."second power supply cable"?
Damn kind of you to chime in.....thank you.
Last edited by chulaivet1966; 11/16/16 02:19 PM.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Jul 2000
Posts: 26,685
Veteran
|
Veteran
Joined: Jul 2000
Posts: 26,685 |
OK, that's more clear. Are both of the drives SATA?
The "second power supply cable" is square - four holes - and it comes out of the power supply and mounts in a different place on some motherboards from the long connector. Depends on the brand...
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Jan 2013
Posts: 1,318
Expert
|
OP
Expert
Joined: Jan 2013
Posts: 1,318 |
OK, that's more clear. Are both of the drives SATA? The "second power supply cable" is square - four holes - and it comes out of the power supply and mounts in a different place on some motherboards from the long connector. Depends on the brand... Yes... That power cord from the power suppler even says 'CPU' on the connector and IS plugged into the m/b properly. Both drives are SATA. As with yourself and many here, I've built many of my own computers for years but the last one WAS my DAW and it was 10 years ago....obviously I'm out of the current knowledge loop with these painful h/w upgrading protocols. I really am leaning to the issue of re-authorization being necessary for this m/b change. Many thanks for even reading my plea...
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Jul 2000
Posts: 26,685
Veteran
|
Veteran
Joined: Jul 2000
Posts: 26,685 |
Good on the power supply.
I guess I'm not clear on exactly how far you are getting. The 'Windows not authorized' message only comes up after Windows is running, and it continues to nag you and blocks installation of other software until you handle it by calling Microsoft. What I think you are describing is nowhere near that far along. Could you be very specific about what the computer does do, and where you are stuck?
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Jan 2013
Posts: 1,318
Expert
|
OP
Expert
Joined: Jan 2013
Posts: 1,318 |
I guess I'm not clear on exactly how far you are getting. The 'Windows not authorized' message only comes up after Windows is running,Could you be very specific about what the computer does do, and where you are stuck? Hey Matt... After I hit DEL to enter CMOS and make sure the drives are recognized I hit 'save and exit'. The Windows splash screen does come up briefly then goes to a prompt stating "Windows was unable to start". Then gives me the option to 'repair' or 'start windows normally'. The 'repair' find snothing specific but at the very end of the 'details' option the dialogue says the problem is likely due to hardware changes....but, nothing more defined than that and does not tell me anything about 're-authorization' itself. I never get to Windows actually opening. Sorry if I didn't communicate as clearly as I had hoped....I'm daft sometimes.
Last edited by chulaivet1966; 11/16/16 04:52 PM.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Jul 2000
Posts: 26,685
Veteran
|
Veteran
Joined: Jul 2000
Posts: 26,685 |
Will Windows start in Safe Mode?
BIAB 2025 Win Audiophile. Software: Studio One 7 Pro, Swam horns, Acoustica-7, Notion 6, Song Master Pro, Win 11 Home. Hardware: Intel i9, 32 Gb; Roland Integra-7, Presonus 192 & Faderport 8, Royer 121, Adam Sub8 & Neumann 120 monitors.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Jan 2013
Posts: 1,318
Expert
|
OP
Expert
Joined: Jan 2013
Posts: 1,318 |
Will Windows start in Safe Mode? Hmmm.... During one of my efforts I stuck in the Win7.0 CD to try and reinstall WITHOUT reformatting completely....wouldn't let me. It was only during that process that 'safe mode' came up as a choice on the command prompt screen. I'll hit it again tomorrow. You're a good man for offering assistance.....I owe you good beer. UPDATE:Just got to 'safe mode' via F8 during boot up. Takes me back the very same screen choices being 'repair (recommended)' or 'start Windows normally'. Neither choice has been successful....just the same merry-go-round of prompts. Thanks....
Last edited by chulaivet1966; 11/16/16 05:25 PM.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Dec 2000
Posts: 12,662
Veteran
|
Veteran
Joined: Dec 2000
Posts: 12,662 |
Just to be clear, did you clean re-install Windows to this machine or did you just use the previous hard drive (or a clone or image of it)? If the latter, then I suspect there are probably some driver incompatibilities keeping Windows from launching. If the former, is your SATA drive in the same mode (IDE, PATA, or AHCI) as your previous computer? When you get to the repair screen, which options do you choose? Have you tried just to repair the boot options, or are you repairing Windows itself? Here's something I would try also (which you may have already done); may not fix it, but worth a try.
John Laptop-HP Omen I7 Win11Pro 32GB 2x2TB, 1x4TB SSD Desktop-ASUS-I7 Win10Pro 32GB 2x1.5TB, 2x2TB, 1x4TB SATA BB2024/UMC404HD/Casios/Cakewalk/Reaper/Studio One/MixBus/Notion/Finale/Dorico/Noteworthy/NI/Halion/IK http://www.sus4chord.com
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Oct 2015
Posts: 29
Enthusiast
|
Enthusiast
Joined: Oct 2015
Posts: 29 |
Might be worth reading this? Windows Error Recovery Windows failed to start. A recent hardware or software change might be the cause. https://neosmart.net/wiki/startup-repair-infinite-loop/
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Apr 2009
Posts: 9,941
Veteran
|
Veteran
Joined: Apr 2009
Posts: 9,941 |
So....if it will boot up with the new 1TB drive, why not simply make that the C drive and make the old C drive the new D drive?
You stated you got a new MB, PS, RAM, CPU, and 1TB HD with W7 installed. hey... go in that direction..... That's exactly what I did on one of my older machines..... I installed the old C drive as D and removed the OS from that drive.
Your software will run from any drive on the machine. All you would need to do is link the data base for BB & RB to their new drive designations and save it.
I'd take the easy way out.
You can find my music at: www.herbhartley.comAdd nothing that adds nothing to the music. You can make excuses or you can make progress but not both. The magic you are looking for is in the work you are avoiding.
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Jan 2013
Posts: 1,318
Expert
|
OP
Expert
Joined: Jan 2013
Posts: 1,318 |
So....if it will boot up with the new 1TB drive, why not simply make that the C drive and make the old C drive the new D drive? I'd take the easy way out. Yep.... That's what occurred to me last night while trying to get to sleep. Makes sense to just use the new (1) terrabyte drive as the C: drive. Obviously, I was trying to mitigate having to re-install everything again. Jford & husker....thank you both for offering some help. I have a loooong day a head of me....thanks again everyone. A good day to all....
|
|
|
|
|
|
|
|
|
|
|
|
Help! Tech S.O.S (Off topic)
|
Joined: Jan 2013
Posts: 1,318
Expert
|
OP
Expert
Joined: Jan 2013
Posts: 1,318 |
Feliz Viernes....UPDATE! Fresh Win7.0 install on the (1)TB drive, all programs installed an got everything up and running (so far) to my satisfaction. Whew....hopefully this rebuild will out live me. Thanks to all for contributing. Have a great weekend....carry on.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Update your Band-in-a-Box® 2025 for Windows® Today!
If you’ve already purchased Band-in-a-Box® 2025 for Windows®, great news—a new update is now available! This update introduces a handy new feature: a vertical cursor in the Tracks window that shows the current location across all tracks, and more.
Discover everything included in this free update and download it now at https://www.pgmusic.com/support_windowsupdates.htm#1124
Video: Band-in-a-Box® 2025 for Windows®: Boot Camp: The AI Lyrics Generator
With Band-in-a-Box 2025® for Windows®, we've introduced an exciting new feature: the AI Lyrics Generator! In this video, Tobin guides you step-by-step on how to make the most of this new tool.
Band-in-a-Box® 2025 for Windows®: Boot Camp: The AI Lyrics Generator video.
Check out the forum post for more information.
Video: Band-in-a-Box® 2025 for Windows®: Using VST3 Plugins
Band-in-a-Box 2025® for Windows® now includes support for VST3 plugins, bringing even more creative possibilities to your music production. Join Simon as he guides you through the process in this easy-to-follow demonstration!
Video: Band-in-a-Box® 2025 for Windows®: Using VST3 Plugins
Join the conversation on our forum.
Video: Band-in-a-Box 2025 for Windows: Using The BB Stem Splitter!
In this video, Tobin provides a crash course on using the new BB Stem Splitter feature included in Band-in-a-Box 2025® for Windows®. During this process he also uses the Audio Chord Wizard (ACW) and the new Equalize Tempo feature.
Video: Band-in-a-Box® 2025 for Windows®: Using the BB Stem Splitter
Check out the forum post for some optional Tips & Tricks!
Congrats to Misha (Rustyspoon)…downloaded/installed a full Audiophile 2025!
Breaking News!
We’re thrilled to announce that Rustyspoon has made PG history as the very first person to successfully complete the download and install of the full Band-in-a-Box 2025 Windows Audiophile Edition (with FLAC files)—a whopping 610GB of data!
A big shoutout to Rustyspoon for stepping up to be our test "elf!"
Thank you for your support, Rustyspoon!
Band-in-a-Box 2025 for Windows Videos
With the launch of Band-in-a-Box® 2025 for Windows, we're adding new videos to our YouTube channel. We'll also share them here once they are published so you can easily find all the Band-in-a-Box® 2025 and new Add-on videos in one place!
Whether it's a summary of the new features, demonstrations of the 202 new RealTracks, new XPro Styles PAK 8, or Xtra Styles PAKs 18, information on the 2025 49-PAK, or detailed tutorials for other Band-in-a-Box® 2025 features, we have you covered!
Reference this forum post for One-Stop Shopping of our Band-in-a-Box® 2025 Videos - we will be updating this post as more videos are added!
Band-in-a-Box 2025 for Windows is Here!
Band-in-a-Box® 2025 for Windows is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 with savings of up to 50% on most upgrade packages during our special—available until December 31, 2024! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Windows 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
|
|
|
|
|
|
|
|
|
|
|
Forums65
Topics84,019
Posts764,570
Members39,261
|
Most Online25,754 Jan 24th, 2025
|
|
|
|
|
|
|
|
|
|
|
There are no members with birthdays on this day. |
|
|
|
|
|
|
|
|