Hi

Well it seems to me in general terms that:
Once you have sent your midi out to an external midi module like your Ketron
And found a way of hearing it
Any of the sources that you can hear on whatever device, are the ones you need to find as inputs on your recording device say, Audacity under the input tab pull down where the mic is in the tool bar.
Or indeed any other wave recorder you may use
You may need a Y adapter if hard wiring the audio to the recording device and you still want to use the head phone at source to monitor.
But normally you can move your headphones on and monitor the recording devices input or output instead once you get the sound coming in,
Try to construct a simple in line chain like this, and try not to get involved in looping things back to the same device.
Mike
Later edit
If you want to involve the Scarlet on the way to add bits and bobs. then send the Ketron’s audio to the Scarlet line inputs and then choose the Scarlet to monitor, and use its output to your wave recorders input.



Last edited by Mike Head; 10/07/18 04:55 AM.
BIAB2021 UltraPlus,AsusN55S1Tbssd, W10/64,Akai EIEpro
Yamaha CVP405,SquireStrat, CoolsoftVMidSynth
Novatation Impulse61 Ctr kbd, Cwalk blab Kontakt

http://mikesmusic.byethost16.com/