Got curious, and just tested VST 1.8.14: It still behaves the same on my system, with Cubase 10. Any MGU wont generate, SGU does generate, but even slower than the 1.7 version, almost a still-stand, thus no sound, and the GUI disappears to the background when you press play ... F
I can only get the VSTfx in Cubase Elements 9. By default the Plugin installer don't install the FX plugin (this is lame) you need to copy it from bb\BBPlugin\Files
The Instrument version VSTi loads into an Instrument track, the FX version VST loads in an Audio track. Some DAWs only have Audio tracks like Adobe Audition and Audacity.
Band-in-a-Box DAW VST Plugin.dll Band-in-a-Box DAW VST FX Plugin.dll
Band-in-a-Box DAW VST3 Plugin.vst3 Band-in-a-Box DAW VST3 FX Plugin.vst3
Band-in-a-Box DAW VST Plugin32.dll (to be released) Band-in-a-Box DAW VST FX Plugin32.dll (to be released)
You should use the VST3 with Cubase, you don't need to worry about the other plugin types. Let us know if you're still having trouble with Cubase after installing the 1.9.19 update (in build 611).
Well, something quirky is going on ... just installed v 611, and checked matters. Seems some oldies linger around as i found them twice already & different here:
just did ... i'll check them later, funny the file date of the 'new' ones is still 31 december; makes things sort of unclear, before the FX version seemed to be older: 21 december. Thnx
I would of had the pre-release 1.9.19 when I tried it in Cubase LE 9 in the post above, so it should work now for you with one or both of the plugins VSTi/VSTfx, just try it in an instrument and an audio track.
Just tested the standalone version ... loading a full blown complex MGU in 1.9.19 still takes forever, and hangs at 90% ... i waited about 4 minutes, then gave up.
Loading it as VST in an instrument track in Cubase: it's the same story .... besides pressing generate causes the plugin to disappear {repeatedly after addressing it again) to the back ground, just as the older version did ......
Originally Posted By: PeterGannon
In our tests the vst3 works fine with Cubase.
Peter, a Q: which Cubase version? Pro 10 i use, and there has been significant changes in the way it handles graphics. Some older plugins don't work anymore, like AVOX and Antares Autotune v 8.1 (crashes Cubase 10) i was told. Both work fine in v 9,5 and before. F
Version 10. Can you check if your bbw4.exe has the "run as admin" setting checked? It should NOT be (if it is, this could be causing your problems if you're running your DAW normally). To check, right-click on the .exe | Properties | compatibility.
It was not, i set it on, and loaded the VST fresh. It took a while for the same file to even start loading, plugin disappearing to the background again. Loading was very slow as before, and gets stuck again at about 90%. No further loading. And surprise: it crashed Cubase 10.0.10 Pro. Cubase 10 did not crash earlier on me !! It all turned loose again, after a waiting period of a few minutes .... and the VST wanted to be generated once again ... then stuck at 90%. I give up LoL. So on or off doesn't make a difference ... Press play on ant track gives the error below ...
PS There were WAV files in the SavedTracks folder, the last one present wouldn't play with Windows Media Player, earliers ones sounded OK (at the end too)
A Q: why is it so difficult to incorporate just an MTC or MidiClock slaving option for BIAB, or better: get a rewire function built in even ????
No, I was confirming that you had it 'OFF', I thought that 'on' could be a cause of the problem.
Quote:
besides pressing generate causes the plugin to disappear
You can click anywhere on screen to bring it back. Cubase really likes to be in front, and that happens in our testing as well, and we are working on that. This is unrelated to the main problem you are having.
Quote:
loading a full blown complex MGU in 1.9.19 still takes forever,
We need to simplify this problem:
1. Load the standalone version. 2. Select any RealStyle (Select button to open StylePicker, click on a style and press OK). 3. Press Generate. Does this work for you?
Done, running as admin, addresses the RT folder all right, selecting a RT, the generate bar works for 2 secs, and then stops. But the track plays.
Loading a MGU midi only works, slow generating, and it works ..
Loading a full blown RT loaded MGU file works but stucks at 90% again, for a long while. The track has not been generated yet message appears when pressing play. (Pressing DEMO produces sound).
The yellow popups indicate somethings generating still, over 5 minutes at least. And after about 8 minutes it works suddenly .... But all it takes tooooooooo long.
PS i am going off-line in a minute or so ... getting late.
Step 1. Open the stand-alone plugin version. To do this, open your Band-in-a-Box folder (bb) and go to BBPlugin\Files. Double-click on "Band-in-a-Box DAW Plugin Stand-alone.exe".
Step 2. Click File | New to make sure you have a new session. Then choose a style. To do this click on the Style button and click on Select Style. After a few seconds the StylePicker opens. Click on the style _12STACM. Press OK.
Step 3. Press the Generate button and wait. It should take about one minute. When it's finished, you should see a yellow message box that has the words "render complete" on it, and the progress bar will stop moving and reset back to the left.
At this point you have generated a "song" which is just a C chord played by the style _12STACM, consisting of five RealTracks instrument tracks. When you press the Play button at the top of the stand-alone plugin window, you should hear it play. ...
Question 1: Do you hear it play?
Look in the BBplugin/SavedTracks folder, look for a subfolder that has the latest timestamp. It should be dated when you generated the track. It should have a name that looks something like this: 2019-1-7, 16-56-58. Open this folder. You should see 10 files - some wave, some MIDI files.
Question 2: Do you see these files?
In the Band-in-a-Box plugin, the tracks should have a little green waveform icon in the green boxes to the left of them, and four of them also have a little yellow "note" icon to the right. The waveform indicates audio data is available for that tack, and the note tells you there is MIDI data available (RealCharts).
The song i was working with before has a 4/4 sig, but about three 2/4 bars, and a few holds. Can that be maybe a reason why it takes 10 minutes almost to render?
I loaded it fresh after the test, used 'reset to default state' first .....
When i waited it all out rendering, there was a new numbered folder in SavedTracks, and in the root of it two files, 5.mid and 6.mid
See picture: After 10 minutes: only one track showed as rendered, and the VST played it OK, but the rest did not show. The files seemed present in the appropriate folder however. The marked file was one chaotic musical mess with the tracks in a mix completely out of sync. regs, F
New! XPro Styles PAK 7 for Band-in-a-Box 2024 for Mac!
We've just released XPro Styles PAK 7 with 100 brand new RealStyles, plus 50 RealTracks and RealDrums that are sure to delight!
With XPro Styles PAK 7 you can expect 25 rock & pop, 25 jazz, and 25 country styles, as well as 25 of this year's wildcard genre: Celtic!
Here's a small sampling of what XPro Styles PAK 7 has to offer: energetic rock jigs, New Orleans funk, lilting jazz waltzes, fast Celtic punk, uptempo train beats, gritty grunge, intense jazz rock, groovy EDM, soulful R&B, soft singer-songwriter pop, country blues rock, and many more!
Special Pricing! Until September 30, 2024, all the XPro Styles PAKs 1 - 7 are on sale for only $29 ea (Reg. $49 ea)! Supercharge your Band-in-a-Box 2024® with XPro Styles PAK 7! Order now!
XPro Styles PAKs require Band-in-a-Box® 2024 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
New! Xtra Styles PAK 18 for Band-in-a-Box 2024 for Mac!
Xtra Styles PAK 18 for Band-in-a-Box version 2024 is here with 200 brand new styles to take for a spin!
Along with 50 new styles each for the rock & pop, jazz, and country genres, we’ve put together a collection of styles using sounds from the SynthMaster plugin!
In this PAK you'll find: dubby reggae grooves, rootsy Americana, LA jazz pop, driving pop rock, mellow electronica, modern jazz fusion, spacey country ballads, Motown shuffles, energetic EDM, and plenty of synth heavy grooves! Xtra Style PAK 18 features these styles and many, many more!
Special Pricing! Until September 30, 2024, all the Xtra Styles PAKs 1 - 18 are on sale for only $29 ea (Reg. $49 ea)! Expand your Band-in-a-Box 2024® library with Xtra Styles PAK 18! Order now!
Learn more and listen to demos of the Xtra Styles PAK 18 here.
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 18 requires the 2024 UltraPAK/UltraPAK+/Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
New! Xtra Styles PAK 18 for Band-in-a-Box 2024 for Windows!
Xtra Styles PAK 18 for Band-in-a-Box version 2024 is here with 200 brand new styles to take for a spin!
Along with 50 new styles each for the rock & pop, jazz, and country genres, we’ve put together a collection of styles using sounds from the SynthMaster plugin!
In this PAK you'll find: dubby reggae grooves, rootsy Americana, LA jazz pop, driving pop rock, mellow electronica, modern jazz fusion, spacey country ballads, Motown shuffles, energetic EDM, and plenty of synth heavy grooves! Xtra Style PAK 18 features these styles and many, many more!
Special Pricing! Until September 30, 2024, all the Xtra Styles PAKs 1 - 18 are on sale for only $29 ea (Reg. $49 ea)! Expand your Band-in-a-Box 2024® library with Xtra Styles PAK 18! Order now!
Learn more and listen to demos of the Xtra Styles PAK 18 here.
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 18 requires the 2024 UltraPAK/UltraPAK+/Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
New! XPro Styles PAK 7 for Band-in-a-Box 2024 for Windows!
We've just released XPro Styles PAK 7 with 100 brand new RealStyles, plus 50 RealTracks and RealDrums that are sure to delight!
With XPro Styles PAK 7 you can expect 25 rock & pop, 25 jazz, and 25 country styles, as well as 25 of this year's wildcard genre: Celtic!
Here's a small sampling of what XPro Styles PAK 7 has to offer: energetic rock jigs, New Orleans funk, lilting jazz waltzes, fast Celtic punk, uptempo train beats, gritty grunge, intense jazz rock, groovy EDM, soulful R&B, soft singer-songwriter pop, country blues rock, and many more!
Special Pricing! Until September 30, 2024, all the XPro Styles PAKs 1 - 7 are on sale for only $29 ea (Reg. $49 ea)! Supercharge your Band-in-a-Box 2024® with XPro Styles PAK 7! Order now!
XPro Styles PAKs require Band-in-a-Box® 2024 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
Video - Band-in-a-Box® DAW Plugin Version 6 for Mac®: New Features for Reaper
Band-in-a-Box® 2024 includes built-in specific support for the Reaper® DAW API, allowing direct transfer of Band-in-a-Box® files to/from Reaper tracks, including tiny lossless files of instructions which play audio instantly from disk.
Already grabbed your copy of Band-in-a-Box® 2024 for Mac®? Head to our Support Page to download build 803 and update your Band-in-a-Box® 2024 installation with the latest version developed by our team!
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.