HI James

Ok try this .
The M oxegen
Is a controller keyboard and therefore has no voices of its own
So you will need to play it through a vsti or dxi internally or send it out to an external midi module.

Lets go the easy way for now, in your midi audio settings in BIAB select your keyboard as midi input.
Use coyote wav table as your dxi synth
And tick the box use VST/DXI
Un tick Route midi thru to midi driver

The default midi piano should play when you press the keys.
You can chose any midi voice as your through voice.

If you make a recording at this stage the recording will go on the Melody track/ channel, (you can use soloist track) in the mixer, and play back using what ever midi voice is set for the melody / soloist track.
So if you want it to sound the same as your through voice then they need to be set to the same voice.
This should serve as a test.
Mike

Attached Files (Click to download or enlarge) (Only available when you are logged in)
biab midi.jpg (184.68 KB, 54 downloads)
Last edited by Mike Head; 02/28/20 05:48 AM.
BIAB2021 UltraPlus,AsusN55S1Tbssd, W10/64,Akai EIEpro
Yamaha CVP405,SquireStrat, CoolsoftVMidSynth
Novatation Impulse61 Ctr kbd, Cwalk blab Kontakt

http://mikesmusic.byethost16.com/