I’m running the latest copy of Reaper and went to load the B-n-B plugin then generated some tracks then hit the send button to send them to Reaper then soloed each track inside Reaper and noticed the tracks sound garbled, gritty and distorted. I thought what could be doing that? I loaded the WMA file (RPS034.wma) inside Reaper and it was not garbled, gritty and distorted. I then turned off the “Use Reaper Instructions” then generated the tracks then sent them over to Reaper and everything sounded OK. This “Use Reaper Instructions” is broke.
I figured out why there are clicks and pops in the garbled tracks. It's because the "Use Reaper Instructions" chops up the track into bit and pieces when it transfers the tracks. These segments in the transferred track do not have cross fades on them which produces clicks and pops. You can see that that they really do overlap without cross fades.
Do you know the story of The King who had no clothes? It describes a situation in which people are afraid to criticize sometime because the perceived wisdom is that something is good or of great value.
Just to be clear here is what PGM has to says about this...
Quote
"What you are seeing is our new REAPER Instructions feature that was specifically designed for REAPER users. When "Use REAPER Instructions" is enabled (in the "Send To REAPER" panel), the plugin will generate raw segments of your track in a fraction of the time! Then, you can use the new "Send To REAPER" Panel to send these instructions directly to REAPER tracks. If you prefer using continuous wav files generated then you can simply disable the "Use REAPER Instructions" option and regenerate your tracks. "
I looked at your files. That is exactly as designed! Just the "instructions" as stung out in seqence. If you want them put together is a smooth manner you have to run the instructions thru the BIAB engine to generate the final audio.
I figured out why there are clicks and pops in the garbled tracks. It's because the "Use Reaper Instructions" chops up the track into bit and pieces when it transfers the tracks. These segments in the transferred track do not have cross fades on them which produces clicks and pops. You can see that that they really do overlap without cross fades.
This is "NOT by design" there's two bug's in the system: 1. Crossfades are not produced in the output which creates clicks and pops. 2. Stretched garbled auto is not a optimal by-product of the BnB engine. The BnB engine must work on the audio just like it does now without the plugin involved then do the transfer to the plugin after it performs it's operations. Not garble the audio then transfer it Reaper. (If it is by design then that feature should be deleted from the system for not reaching a usable state or until Reaper adds more API to handle it better. The ReaScript & LUA scripting language in Reaper is pretty robust)
I figured out why there are clicks and pops in the garbled tracks. It's because the "Use Reaper Instructions" chops up the track into bit and pieces when it transfers the tracks. These segments in the transferred track do not have cross fades on them which produces clicks and pops. You can see that that they really do overlap without cross fades.
That bizarre chopping up of tracks was part of the collection of oddities that contributed to me throwing my toys out of the pram the other day when I was also having multiple misbehaviours with the drag-and-drop. Clearly I'm right to stay away from it for a while.
Jazz relative beginner, starting at a much older age than was helpful. AVL:MXE Linux; Windows 11 BIAB2024 Audiophile, a bunch of other software. Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts .
This is "NOT by design" there's two bug's in the system:
This is the way it has worked through all of beta testing and final release going on forover two months. PGM has not acknowleged that a fix is needed or coming! This is not included in the tracking list of bugs. All that talk about fixes coming, comes from one guy who does not speak for PGM. Adar, the developer was clear in his statement I provided, if you don't like the way it works, turn it off in the preferences.
You know.. I've been a software engineer for over 35 years. Early in my career I used to receive bug reports and get upset that somebody would criticize my software that I developed by telling me I missed something or I had to go the extra mile to accommodate the user in some fashion. I tell you right now those products that I built suffered in quality that yielded a true lack of usage. I was really in game of destroying the messenger of the bug report or even the user for that matter. I soon learned that if I was to design a piece of software that user loved and came back to everyday to get what he/she needed done, I must listen to them and understand what and why they are saying these things. I hope the real programmer here stands up chimes in and hears on what I’m saying about these issues. I'm just the messenger, user, investor and a programmer.
What I learnt coming here years ago if you try to change things, fix thing or suggest new ideas you get jumped on by long term users and you end up saying "it's not worth it I will just leave and not come back" as so many do, hence why it has been held back in the 90's technology and looks for so long. I suggested the PLUGIN years and years ago and kept posting ideas how it could work then eventually PG hired a PLUGIN programmer for the job, hence the job. Getting it to work now in Reaper was because of years of posting how it could be done with virtually zero interest or support from other users, even other users saying don't worry about those Reaper idea postings it's all crap. But the users now don't mind using all the new functions now added to Biab and the PLUGIN because of the ideas posted using Reaper. Long story short, if I left after negativity of first coming here it would be still in the dark ages.
Relax Muso, I am confident you will still be here long after all the old timers are gone.
My intent here was only to clarify your response to the OP,
Quote
"There should be a fix for that soon but the PLUGIN programmer needs to wait on the Biab programmer to fix it in BBW4 that runs in the background".
Just for the record, you are not the only one contributing to the advancement of BIAB. A group of old timers/users spend a considerable about of time testing and discussing and recommending directly with PGM. Which is why I pointed out that currently there is no "fix for that soon" that I am aware of. The general understanding is this feature, introduced in 2024, may become more prominate in 2025 when it will be further developed. In the mean time use it or turn it off in preferences.
"there is no "fix for that soon" that I am aware of" how aware of things are they when saying something is crap then PG implement it ? I would say zero awareness of things. He won't get the wrong idea, he got the IDEA and is using it, the PLUGIN, it now generates fast and you don't have to wait for wav files, why ? because some idiot posted all the information that went over the heads of most users, and still does.
Some of the comments in this thread are incorrect.
First, I tested your project file and the distortion is definitely there and sounds terrible, especially on the Guitar tracks. This is an artifact caused by Reaper pitch shifting and tempo stretching the wave files.
You can fix this by going to File | Project Settings and setting the pitch shifting method to Elastique Pro 3. It's possible there are other parameters here which you can set. Try the defaults (see attached image).
With the Reaper Instructions feature, it's Reaper that does a lot of the 'processing' of the raw wave files. If you weren't using Reaper Instructions, then it would be Band-in-a-Box doing the tempo stretching and any additional processing, and it would be giving you one long wave file for each track, all ready to go. Each method has pros and cons.
So DrDan is more or less correctly describing the feature, but didn't identify the cause of the distortion, while I think Musocity is talking about the concept of the BiaB DAW plugin in general.
The default setting you show are indeed "default" in Reaper. These were set on my machine when I played the tracks. While I didn't really hear "clicks and pops" I did hear poor sounding audio (distortion? maybe). So is Reaper not stretching and processing the audio pieces as well as BIAB does it??
So is Reaper not stretching and processing the audio pieces as well as BIAB does it??
Reaper uses the same Elastique engine, so I would expect that overall the quality is as good as Band-in-a-Box. However, there are various settings and other factors. For example, there are lower quality settings that require less CPU power. I found that the OP's project (to clarify, a project-specific setting) was set to Elastique 3 "Soloist" and when I changed it to Elastique 3 "Pro", that fixed most of the distortion I was hearing. It's possible that the Soloist setting has a specific use case - maybe only monophonic material. It would make sense that it didn't do well with those strumming guitar tracks.
OK, good answer. The Soloist is default, I changed it to pro and sure enough the guitar strum was brighter and clearer.
I don't think Soloist is the default for a new project, and it shouldn't be. It should be (and IS, as far as I can tell) "Elastique 3 Pro" which is the best quality.
Generate Lyrics for your Band-in-a-Box songs with LyricLab!
Need some lyrics to complete your Band-in-a-Box song? LyricLab is here to help!
LyricLab (by Joanne Cooper) is an AI-powered tool designed to quickly create lyrics and chords to fit your music. Just enter a rough idea of your lyrics, and let the AI bring them to life. Once you're happy with the results, simply import the LyricLab file into Band-in-a-Box® 2024 or newer. From there, you can pick your style and generate melodies to match your song’s chords!
Ci siamo dati da fare e abbiamo aggiunto oltre 50 nuove funzionalità e una straordinaria raccolta di nuovi contenuti, tra cui 222 RealTracks, nuovi RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, Playable RealTracks Set 3, Playable RealDrums Set 2, due nuovi set di "RealDrums Stems", XPro Styles PAK 6, Xtra Styles PAK 17 e altro ancora!
Wir waren fleißig und haben über 50 neue Funktionen und eine erstaunliche Sammlung neuer Inhalte hinzugefügt, darunter 222 RealTracks, neue RealStyles, MIDI SuperTracks, Instrumental Studies, "Songs with Vocals" Artist Performance Sets, abspielbare RealTracks Set 3, abspielbare RealDrums Set 2, zwei neue Sets von "RealDrums Stems", XPro Styles PAK & 7, Xtra Styles PAK 17 & 18, und mehr!
Band-in-a-Box® 2024 apporte plus de 50 fonctions nouvelles ainsi qu'une importante de contenus nouveaux à savoir : 222 RealTracks, des RealStyles nouveaux, des SuperTracks MIDI, des Etudes d'Instruments, des Prestations d'Artistes, des "Morceaux avec Choeurs", un Set 3 de Tracks Jouables, un Set 2 de RealDrums Jouables, deux nouveaux Sets de "RealDrums Stems", des Styles XPro PAK 6 & 7, des Xtra Styles PAK 17 & 18, et bien plus encore!
New! XPro Styles PAK 7 for Band-in-a-Box 2024 for Mac!
We've just released XPro Styles PAK 7 with 100 brand new RealStyles, plus 50 RealTracks and RealDrums that are sure to delight!
With XPro Styles PAK 7 you can expect 25 rock & pop, 25 jazz, and 25 country styles, as well as 25 of this year's wildcard genre: Celtic!
Here's a small sampling of what XPro Styles PAK 7 has to offer: energetic rock jigs, New Orleans funk, lilting jazz waltzes, fast Celtic punk, uptempo train beats, gritty grunge, intense jazz rock, groovy EDM, soulful R&B, soft singer-songwriter pop, country blues rock, and many more!
Special Pricing! Until September 30, 2024, all the XPro Styles PAKs 1 - 7 are on sale for only $29 ea (Reg. $49 ea)! Supercharge your Band-in-a-Box 2024® with XPro Styles PAK 7! Order now!
XPro Styles PAKs require Band-in-a-Box® 2024 or higher and are compatible with ANY package, including the Pro, MegaPAK, UltraPAK, UltraPAK+, and Audiophile Edition.
New! Xtra Styles PAK 18 for Band-in-a-Box 2024 for Mac!
Xtra Styles PAK 18 for Band-in-a-Box version 2024 is here with 200 brand new styles to take for a spin!
Along with 50 new styles each for the rock & pop, jazz, and country genres, we’ve put together a collection of styles using sounds from the SynthMaster plugin!
In this PAK you'll find: dubby reggae grooves, rootsy Americana, LA jazz pop, driving pop rock, mellow electronica, modern jazz fusion, spacey country ballads, Motown shuffles, energetic EDM, and plenty of synth heavy grooves! Xtra Style PAK 18 features these styles and many, many more!
Special Pricing! Until September 30, 2024, all the Xtra Styles PAKs 1 - 18 are on sale for only $29 ea (Reg. $49 ea)! Expand your Band-in-a-Box 2024® library with Xtra Styles PAK 18! Order now!
Learn more and listen to demos of the Xtra Styles PAK 18 here.
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 18 requires the 2024 UltraPAK/UltraPAK+/Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
New! Xtra Styles PAK 18 for Band-in-a-Box 2024 for Windows!
Xtra Styles PAK 18 for Band-in-a-Box version 2024 is here with 200 brand new styles to take for a spin!
Along with 50 new styles each for the rock & pop, jazz, and country genres, we’ve put together a collection of styles using sounds from the SynthMaster plugin!
In this PAK you'll find: dubby reggae grooves, rootsy Americana, LA jazz pop, driving pop rock, mellow electronica, modern jazz fusion, spacey country ballads, Motown shuffles, energetic EDM, and plenty of synth heavy grooves! Xtra Style PAK 18 features these styles and many, many more!
Special Pricing! Until September 30, 2024, all the Xtra Styles PAKs 1 - 18 are on sale for only $29 ea (Reg. $49 ea)! Expand your Band-in-a-Box 2024® library with Xtra Styles PAK 18! Order now!
Learn more and listen to demos of the Xtra Styles PAK 18 here.
Note: The Xtra Styles require the UltraPAK, UltraPAK+, or Audiophile Edition of Band-in-a-Box®. (Xtra Styles PAK 18 requires the 2024 UltraPAK/UltraPAK+/Audiophile Edition. They will not work with the Pro or MegaPAK version because they need the RealTracks from the UltraPAK, UltraPAK+, or Audiophile Edition.
One of our representatives will be happy to help you over the phone. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday, and 8:00AM to 4:00PM PST Saturday. We are closed Sunday. You can also send us your questions via email.
One of our representatives will be happy to help you on our Live Chat or by email. Our hours of operation are from
6:00AM to 6:00PM PST (GMT -8) Monday thru Friday; 8:00AM to 4:00PM PST (GMT -8) Saturday; Closed Sunday.
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean