|
Log in to post
|
Print Thread |
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2002
Posts: 12,017
Veteran
|
Veteran
Joined: Dec 2002
Posts: 12,017 |
I hope all wishes are fulfilled.
I only had one wish. “An improved search concept”. I can’t find anything relating to "search" that has improved. It is there in 2025, with Midi Sup, Midi Tk, Midi Sol - in the MTP. These new tabs look complex but in the first few minutes I could see what this is doing. It is opening up the huge history (library) of midi content for searching, auditioning and selection. Allowing the insertion of midi tracks directly into the chord chart/mixer. I am very optimistic about this new feature. I recall the challenge of inserting midi into a RT style in the past - it was daunting to say the least.  It is good to have stem separation now in BIAB as well but not really necessary for those doing most work (and stem separation) outside BIAB in the DAW(SO) and SMP. Time mapping is so much easier in those software packages (SMP automatically, SO single operation). I find time mapping in ACW very frustrating and time consuming. It would be very useful to be able to import the "Time Map" from external software (DAW and SMP) I could not have said it better. 
BIAB – 2025, Reaper (current), i7-12700F Processor, 32GB DDR4-3200MHz RAM, 1TB WD Black NVMe SSD, 2TB WDC Blue SSD, 1TB WD Blue, 2 TB SK NVMe, 6 TB External, Motu Audio Express 6x6
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2015
Posts: 2,260
Veteran
|
|
Veteran
Joined: Jan 2015
Posts: 2,260 |
Thanks. Bad news. So, if you were to buy the downloadable special price package for new audiophile update, at $149, then you pay an additional 20% of that $149 as your total purchase price of nearly $180. Thus there is no benefit to buying by download? In all the discussions we have had on this (of which as a USA resident I have no real understanding), we assumed that PG Music developing a downloadable audiophile version (and the full one is coming someday) would help you. Well, we would still save the cost of the SSD and the VAT on that, which is another $30. In principle, in the UK at least, there's a way to avoid it if it's "education support media", but HMRC always seem to fight everything. When they fight, they also charge admin fees and sometimes more, so it's usually "just tolerate it". In principle taxes may for the state services we get, though they're often none to efficient. C'est la vie.
Jazz relative beginner, starting at a much older age than was helpful.
AVL:MXE Linux; Windows 11
BIAB2024 Audiophile, a bunch of other software.
Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts
.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2015
Posts: 2,260
Veteran
|
|
Veteran
Joined: Jan 2015
Posts: 2,260 |
Same here, there's nothing really interesting for me in this update, but I upgraded anyway. I didn't expect (nor wanted) 50 new features, but I certainly expected existing features (like search, or tracks view) to be improved and lots of reported bugs to be fixed. This has been discussed extensively this year here, and I really hope future 2025 updates will cover this. Similar, though I'll not get the update just yet. I'd like to see that things have really improved. I'll likely buy before 31 Dec, but not actually install for a while. My depression means I try to avoid the stress of bugs because my past professional life means I try to isolate them for the developers. And I don't need that.
Jazz relative beginner, starting at a much older age than was helpful.
AVL:MXE Linux; Windows 11
BIAB2024 Audiophile, a bunch of other software.
Kawai MP6, Ui24R, Focusrite Saffire Pro40 and Scarletts
.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Nov 2002
Posts: 176
Apprentice
|
|
Apprentice
Joined: Nov 2002
Posts: 176 |
Hi Uncle Paul,
I too am interested in creating backing tracks and I have looked at various utilities to do this. In particular I am interested in losing the lead vocal but retaining the backing vocals. Most of the stem splitter utilities seem to split ALL vocals (lead and BV) into a single consolidated track from which it is terribly difficult to manually separate the lead vocals from the BVs. Have you come across any utilities that can do this automatically?
Apologies for going a little off-topic here but I think that this might be of interest to others who want to use stem-splitters.
Regards, Aubrey
If I hadn't seen such riches I could live with being poor.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2008
Posts: 538
Journeyman
|
Journeyman
Joined: Jun 2008
Posts: 538 |
Hi Uncle Paul,
I too am interested in creating backing tracks and I have looked at various utilities to do this. In particular I am interested in losing the lead vocal but retaining the backing vocals. Most of the stem splitter utilities seem to split ALL vocals (lead and BV) into a single consolidated track from which it is terribly difficult to manually separate the lead vocals from the BVs. Have you come across any utilities that can do this automatically?
Apologies for going a little off-topic here but I think that this might be of interest to others who want to use stem-splitters.
Regards, Aubrey All of mine cannot do that but this place advertises it can. It is a paid subscription it appears. LALAL.AI Lead & Back Vocal Splitter
BIAB 2025 Ultrapack- Studio One Pro 7 Windows 11, Mac Mini M4 with Logic Pro 11, Melodyne Studio
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2005
Posts: 146
Apprentice
|
|
Apprentice
Joined: Jan 2005
Posts: 146 |
A similar link is: https://studio.moises.ai/login/I haven't studied how they do it, but they offer to separate the main vocal from the backing vocal. And they also offer an app. I just read it, but I have Ripx DAW Pro and if I really needed to separate the backing vocal from the main one, I can do it manually in Ripx and not have to check if someone's machine did it correctly.
Last edited by Gause Zdenek; 12/05/24 02:59 PM.
BIAB 2023,RB 2023,PTA 2023,Windows 11,Studio One PRO 5.52,Melodyne Studio 5.3.1,Sibelius 8.4.1,Acoustica 7.4.14,Notion 6,Progression 3,Harmony Assistant 9.9.5c,RX9,Ripx DeepAudio 6.4.0,Kontakt 6.8.0,DeCoda 1.3.0,Synthesizer V Studio Pro 1.90 a další.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2019
Posts: 80
Enthusiast
|
|
Enthusiast
Joined: Dec 2019
Posts: 80 |
Hi Aubry,
I have a way that, depending on the original record, works to some extend. But it is a lot of work. I Separate the stems, load the vocal into Melodyne (Melodyne from Celemony is not cheap and I am not sure at what level the product can do the following. I doubt entry level can.) The following is done within Studio One, using the ARA feature. I am not sure if using an Audio Workstation and a stand alone Melodyne will work, due to the fact that original recording, the stem separated and the resultig "cleaned Vocal" must be precisely in synch. Ortherwise the inverting and mixing will not do at all.
Okay, in Melodyne I am able to examine "Blob" by "Blob" What is lead vocal or a residue from other Instruments or part of the Back vocals (Choir).
When I detect such Blob, I sort of delete it. Very time consuming. The resulting Stems (that should as best case consist of the lead vocal itself) is then inverted and "mixed" with the original recording. In the end, only the lead vocal is gone.
Now you could, if you so wish, seperate the stems of the resulting backing track and maybe get a separate vocal track with choir. As I said, this depends on the type of original recording.
Getting totaly rid of the reverb of the lead vocal is almost impossible, but that part that resides is no problem for me. It is covered by my own voice.
“Musicians”: UltraPak 2025
DAW: Studio One Pro +
"Instruments": VSTs and REs
Notation: Notion 6
Interface: NI Komplete Audio 6
Mic: RØDE NT1-A
Controller: Panorama P6/KAWAI VPC1/Atom
OS: Win 10 64 Pro
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2019
Posts: 80
Enthusiast
|
|
Enthusiast
Joined: Dec 2019
Posts: 80 |
Hello again Aubry,
another way that might work is to use Ultimate Vocal Remover. the tool is free and offers a variety of AI models (that is the training information to teach the AI engine). And that it's doesn't mean its cheap. It is regarded as par with the likes of iZotope. The multiple offers available as an app or online do not differ much with regards to the engine, but with the training models used. UVR offers a whole lot of such models and you can even combine some. Picking the right one is trial and error for each new song. But you may succeed. I found it useful, but somehow there is a sync problem when loading the stems into my Daw (maybe related to different sample rates and bit sizes the respective Software uses internaly). So I prefer to stay with my "One Tool Only" approach and do everything within my DAW. Stem separation is a native part and Melodyne thightly integrated.
“Musicians”: UltraPak 2025
DAW: Studio One Pro +
"Instruments": VSTs and REs
Notation: Notion 6
Interface: NI Komplete Audio 6
Mic: RØDE NT1-A
Controller: Panorama P6/KAWAI VPC1/Atom
OS: Win 10 64 Pro
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2019
Posts: 80
Enthusiast
|
|
Enthusiast
Joined: Dec 2019
Posts: 80 |
I have Ripx DAW Pro and if I really needed to separate the backing vocal from the main one, I can do it manually in Ripx and not have to check if someone's machine did it correctly. How would that be done manualy in RipX DAW Pro? I would like to test with the trial they offer.
“Musicians”: UltraPak 2025
DAW: Studio One Pro +
"Instruments": VSTs and REs
Notation: Notion 6
Interface: NI Komplete Audio 6
Mic: RØDE NT1-A
Controller: Panorama P6/KAWAI VPC1/Atom
OS: Win 10 64 Pro
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2020
Posts: 4
Newbie
|
|
Newbie
Joined: Dec 2020
Posts: 4 |
In recent years, the promotional code to offset the 20% VAT has always been released very promptly and I quickly decided to upgrade. This year, it is being held back or not coming at all. And this is an update where not much has changed in terms of the substance of the program (who needs a stem splitter, they are now available in abundance). Above all, the old-fashioned interface has not been changed, only more complicated form registers have been added. The tons of new Realtracks are nice, but like many others, I had hoped that the classics (jazz, folk, etc.) would not be the main focus again. I have come to the conclusion that I will not update if the promo code for EU countries is not available. It's a shame, this product policy will probably reduce the fan base somewhat.
Update:
I have to correct my statement - the promo code for 20% has just arrived by email. So there will probably be an update soon. I hope that a detailed explanatory video about the new functions will be released soon - the written instructions are not enough.
Last edited by DJ_Kerzi; 12/06/24 05:48 AM. Reason: Promocode has arrived!
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Sep 2013
Posts: 359
Journeyman
|
|
Journeyman
Joined: Sep 2013
Posts: 359 |
My guess is that it will not come, and that it was only the first year to keep people calm (but who knows).
(anyway it is to late for me I just payed VAT+25%).
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2005
Posts: 146
Apprentice
|
|
Apprentice
Joined: Jan 2005
Posts: 146 |
I haven't needed to move voices yet, I've moved always notes from other instruments. I create so far my own backing vocals. If I need to separate the main vocal from the backing vocals, I create a new track and call it main vocal. There are usually fewer notes in the main vocal than in the others. If back vocals are only in the choruses, then I mark all the notes in the verses and move them to the newly created track. In the choruses, I find the notes of the main vocal more easily, which I mark (it's not necessary to move the entire chorus at once, but maybe only three notes at a time). I move them using the icon next to the track where I want to move the notes, which is the third icon in the sequence (mute, solo, move notes, record).
BIAB 2023,RB 2023,PTA 2023,Windows 11,Studio One PRO 5.52,Melodyne Studio 5.3.1,Sibelius 8.4.1,Acoustica 7.4.14,Notion 6,Progression 3,Harmony Assistant 9.9.5c,RX9,Ripx DeepAudio 6.4.0,Kontakt 6.8.0,DeCoda 1.3.0,Synthesizer V Studio Pro 1.90 a další.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2008
Posts: 538
Journeyman
|
|
Journeyman
Joined: Jun 2008
Posts: 538 |
Hi Aubry,
I have a way that, depending on the original record, works to some extend. But it is a lot of work. I Separate the stems, load the vocal into Melodyne (Melodyne from Celemony is not cheap and I am not sure at what level the product can do the following. I doubt entry level can.) The following is done within Studio One, using the ARA feature. I am not sure if using an Audio Workstation and a stand alone Melodyne will work, due to the fact that original recording, the stem separated and the resultig "cleaned Vocal" must be precisely in synch. Ortherwise the inverting and mixing will not do at all.
Okay, in Melodyne I am able to examine "Blob" by "Blob" What is lead vocal or a residue from other Instruments or part of the Back vocals (Choir).
When I detect such Blob, I sort of delete it. Very time consuming. The resulting Stems (that should as best case consist of the lead vocal itself) is then inverted and "mixed" with the original recording. In the end, only the lead vocal is gone.
Now you could, if you so wish, seperate the stems of the resulting backing track and maybe get a separate vocal track with choir. As I said, this depends on the type of original recording.
Getting totaly rid of the reverb of the lead vocal is almost impossible, but that part that resides is no problem for me. It is covered by my own voice. Correct about Melodyne. Melodyne essential only works with monophonic notes. If you own Melodyne Studio it is a multitrack editor which then you could use the stand alone version to edit stems. There are programs that can remove reverb. The one I own is from iZotope and is called RX 10 De-Reverb. I have never used this so I cannot say how well this actually works but I am now tempted to give it a shot just to see myself. My own personal use of Stem separation is just to hear different parts of the song I am trying to figure out. As far as Rip X Daw Pro I only have the Rip X Daw program which cannot do what Melodyne can do. Now the Pro version does have an edit feature called split notes which I suppose might be able to do what you were doing in Melodyne.
BIAB 2025 Ultrapack- Studio One Pro 7 Windows 11, Mac Mini M4 with Logic Pro 11, Melodyne Studio
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2019
Posts: 80
Enthusiast
|
|
Enthusiast
Joined: Dec 2019
Posts: 80 |
I have RX10 (bought it because the stem separation), did not do much with the other tools inside. Thank you for the hint. I will check out what it can do to remove reverb.
“Musicians”: UltraPak 2025
DAW: Studio One Pro +
"Instruments": VSTs and REs
Notation: Notion 6
Interface: NI Komplete Audio 6
Mic: RØDE NT1-A
Controller: Panorama P6/KAWAI VPC1/Atom
OS: Win 10 64 Pro
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2005
Posts: 146
Apprentice
|
|
Apprentice
Joined: Jan 2005
Posts: 146 |
I have both Ripx DAW Pro and Melodyne Studio. But I'm not one of those precise users who have the manual in their head and can use anything. I have Ripx DAW Pro, but I only use it as a Ripx DAW, because it's enough for me when creating my own songs. I inherited Ripx DAW Pro by buying the highest version in 2020. For "Brian Hughes" - I couldn't find the "split note" function in the manual, but that might be my fault because I have a hard time navigating the English text and I'm translating it into Czech using Google translator. I'm looking for it in the manual, which I find in the Help menu in open Ripx and the link is right at the top. You don't have to deal with it, I don't need it for work, I'm just curious. Yes, Melodyne is better than Ripx in some functions, but sometimes it's also inaccurate, so I'm glad I have both applications. For "Uncle Paul": What about trying not to delete the main vocal, but just to lower it below the level of audibility. (I have no experience with this) - It's just a thought. iZotope uses one of the cleaning methods that they don't erase the areas for cleaning, but they reduce the volume below the level of audibility. Of course, they reduce it even more with a smaller margin, because some of us have better hearing. If I then add a new lead vocal to the recording, no one will hear the original one...
BIAB 2023,RB 2023,PTA 2023,Windows 11,Studio One PRO 5.52,Melodyne Studio 5.3.1,Sibelius 8.4.1,Acoustica 7.4.14,Notion 6,Progression 3,Harmony Assistant 9.9.5c,RX9,Ripx DeepAudio 6.4.0,Kontakt 6.8.0,DeCoda 1.3.0,Synthesizer V Studio Pro 1.90 a další.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Dec 2003
Posts: 22,005
Veteran
|
|
Veteran
Joined: Dec 2003
Posts: 22,005 |
............................ For "Brian Hughes" - I couldn't find the "split note" function in the manual, but that might be my fault because I have a hard time navigating the English text and I'm translating it into Czech using Google translator............................. In Melodyne Studio the split note function works with the timing scale. For example if the scale is set to quarter notes you can split only at quarter notes. I usually set mine to 32 second notes so I can split at every 32 second note. V Melodyne Studio pracuje funkce rozdělené noty se stupnicí časování. Například pokud je stupnice nastavena na čtvrťové noty, můžete dělit pouze na čtvrťové noty. Obvykle jsem si nastavil noty na 32 sekund, takže se mohu rozdělit na každou 32 sekundovou notu.
Unclear if the pianist is a total beginner or a professional jazz player?
64 bit Win 10 Pro, the latest BiaB/RB, Roland Octa-Capture audio interface, a ton of software/hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2005
Posts: 146
Apprentice
|
|
Apprentice
Joined: Jan 2005
Posts: 146 |
Thanks Mario for your lesson. I mistakenly misunderstood "split note" and thought it meant "separating notes from each other". Yes, the correct translation of "split" is different from "separate". I use Melodyne more to correct the intonation of my singing (I am only and only an amateur singer). I use the "split note" function quite consciously in Synthesizer V Pro and here the translation of "split" fully matches your interpretation. We, who do not master English "like cracking a whip" - a Czech proverb "to fully control something", have problems thinking in a foreign language (English) and thus we easily go astray. At my age, I do not stress about mistakes, but I take the situation as fun.
BIAB 2023,RB 2023,PTA 2023,Windows 11,Studio One PRO 5.52,Melodyne Studio 5.3.1,Sibelius 8.4.1,Acoustica 7.4.14,Notion 6,Progression 3,Harmony Assistant 9.9.5c,RX9,Ripx DeepAudio 6.4.0,Kontakt 6.8.0,DeCoda 1.3.0,Synthesizer V Studio Pro 1.90 a další.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jun 2008
Posts: 538
Journeyman
|
|
Journeyman
Joined: Jun 2008
Posts: 538 |
In Melodyne Studio the split note function works with the timing scale. For example if the scale is set to quarter notes you can split only at quarter notes. I usually set mine to 32 second notes so I can split at every 32 second note.
V Melodyne Studio pracuje funkce rozdělené noty se stupnicí časování. Například pokud je stupnice nastavena na čtvrťové noty, můžete dělit pouze na čtvrťové noty. Obvykle jsem si nastavil noty na 32 sekund, takže se mohu rozdělit na každou 32 sekundovou notu. Yes I use that feature in Melodyne quite a bit myself. In Rip X Pro this is what the Clean/Repair says it can do? The Clean / Repair menu also allows live audio repair and clean-up features for removing background noise, limiting foreground artifacts, reducing tones & hum, and purifying pitched and unpitched sounds from stems.
BIAB 2025 Ultrapack- Studio One Pro 7 Windows 11, Mac Mini M4 with Logic Pro 11, Melodyne Studio
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Apr 2013
Posts: 8,383
Veteran
|
|
Veteran
Joined: Apr 2013
Posts: 8,383 |
>> The one area where my thinking falls apart is if the individual audio tracks from the splitting process are saved with ACID information. In this case, the vocalist track will be adjusted to the variations of the tempo map. This would cause the vocalist's track to misalign.>> So did I, but I'm getting different results than I had expected. Thanks for trying! I'll get to the bottom of the mystery. I suspect there is more to this than meets the eye and I was treating the issue too simply. I'll definitely let you know the outcome. --Noel The second scenario the vocal track and band will lose sync is the ACW (a single track function) has to have the first bar set before creating the Chord analysis and tempo map. The Master Track is imported to the Audio Track (which is the correct track for the ACW to analyze.) Setting Bar one repositions the audio on the Audio Track if bar one isn't the beginning of the song. The analysis will sync the Audio Track with the Chord Sheet but the other imported isolated stems are not affected by this process and are now out of sync with the Audio Track and BIAB Chord Sheet. Most times the vocal track doesn't begin on Bar one and it can be a bit tricky to get it properly aligned. Splitting Stems using RealBand and it's ACW doesn't have this issue in the songs I've tested so far. BIAB can automatically sync any imported stem track, such as the vocal track, with the Chord Sheet and tempo during the Master Track analysis if it's set up to do so.
BIAB 2025:RB 2025, Latest builds: Dell Optiplex 7040 Desktop; Windows-10-64 bit, Intel Core i7-6700 3.4GHz CPU and 16 GB Ram Memory.
|
|
|
|
|
|
|
|
|
|
|
|
|
Band-in-a-Box for Windows
|
Joined: Jan 2020
Posts: 3,154
Veteran
|
|
Veteran
Joined: Jan 2020
Posts: 3,154 |
Charlie.
as you said there are rb plusses re seperation/acw etc etc.
what i want to do is 'tart up' old tape based masters done in big studios...
but of course they have some minute tempo fluctuations.
(wow/flutter).
so what i'm hoping to do is in rb..
..use the acw to get the tempo map then
..stem split then....
..as rb has click/noise removal use this to lower noise floors of low level
noise etc....then...
..add new tracks useing pg rt's//rd's//midi supertracks etc etc.
any advice re tricks ?? will all the stems line up with the new pg content/tempo map ?? i would be ecstatic. for example some old masters were 'jams' in studios that people have told me they like but need addition of further instrumentation ideas or some were done with junk gear for laughs. many ive tried to re-record but people have told me they prefer the demoes.
need your advice mate.... cheers.
merry xmas.
om
Last edited by justanoldmuso; 12/07/24 07:51 AM.
|
|
|
|
|
|
|
|
|
|
|
|
Ask sales and support questions about Band-in-a-Box using natural language.
ChatPG's knowledge base includes the full Band-in-a-Box User Manual and sales information from the website.
|
|
|
|
|
|
|
|
|
|
|
Update your Band-in-a-Box® 2025 for Windows® Today!
If you’ve already purchased Band-in-a-Box® 2025 for Windows®, great news—a new update is now available! This update introduces a handy new feature: a vertical cursor in the Tracks window that shows the current location across all tracks, and more.
Discover everything included in this free update and download it now at https://www.pgmusic.com/support_windowsupdates.htm#1124
Video: Band-in-a-Box® 2025 for Windows®: Boot Camp: The AI Lyrics Generator
With Band-in-a-Box 2025® for Windows®, we've introduced an exciting new feature: the AI Lyrics Generator! In this video, Tobin guides you step-by-step on how to make the most of this new tool.
Band-in-a-Box® 2025 for Windows®: Boot Camp: The AI Lyrics Generator video.
Check out the forum post for more information.
Video: Band-in-a-Box® 2025 for Windows®: Using VST3 Plugins
Band-in-a-Box 2025® for Windows® now includes support for VST3 plugins, bringing even more creative possibilities to your music production. Join Simon as he guides you through the process in this easy-to-follow demonstration!
Video: Band-in-a-Box® 2025 for Windows®: Using VST3 Plugins
Join the conversation on our forum.
Video: Band-in-a-Box 2025 for Windows: Using The BB Stem Splitter!
In this video, Tobin provides a crash course on using the new BB Stem Splitter feature included in Band-in-a-Box 2025® for Windows®. During this process he also uses the Audio Chord Wizard (ACW) and the new Equalize Tempo feature.
Video: Band-in-a-Box® 2025 for Windows®: Using the BB Stem Splitter
Check out the forum post for some optional Tips & Tricks!
Congrats to Misha (Rustyspoon)…downloaded/installed a full Audiophile 2025!
Breaking News!
We’re thrilled to announce that Rustyspoon has made PG history as the very first person to successfully complete the download and install of the full Band-in-a-Box 2025 Windows Audiophile Edition (with FLAC files)—a whopping 610GB of data!
A big shoutout to Rustyspoon for stepping up to be our test "elf!"
Thank you for your support, Rustyspoon!
Band-in-a-Box 2025 for Windows Videos
With the launch of Band-in-a-Box® 2025 for Windows, we're adding new videos to our YouTube channel. We'll also share them here once they are published so you can easily find all the Band-in-a-Box® 2025 and new Add-on videos in one place!
Whether it's a summary of the new features, demonstrations of the 202 new RealTracks, new XPro Styles PAK 8, or Xtra Styles PAKs 18, information on the 2025 49-PAK, or detailed tutorials for other Band-in-a-Box® 2025 features, we have you covered!
Reference this forum post for One-Stop Shopping of our Band-in-a-Box® 2025 Videos - we will be updating this post as more videos are added!
Band-in-a-Box 2025 for Windows is Here!
Band-in-a-Box® 2025 for Windows is here, packed with major new features and an incredible collection of available new content! This includes 202 RealTracks (in Sets 449-467), plus 20 bonus Unreleased RealTracks in the 2025 49-PAK. There are new RealStyles, MIDI SuperTracks, Instrumental Studies, “Songs with Vocals” Artist Performance Sets, Playable RealTracks Set 4, two new sets of “RealDrums Stems,” XPro Styles PAK 8, Xtra Styles PAK 19, and more!
Special Offers
Upgrade to Band-in-a-Box® 2025 with savings of up to 50% on most upgrade packages during our special—available until December 31, 2024! Visit our Band-in-a-Box® packages page for all the purchase options available.
2025 Free Bonus PAK & 49-PAK Add-ons
We've packed our Free Bonus PAK & 49-PAK with some incredible Add-ons! The Free Bonus PAK is automatically included with most Band-in-a-Box® for Windows 2025 packages, but for even more Add-ons (including 20 Unreleased RealTracks!) upgrade to the 2025 49-PAK for only $49. You can see the full lists of items in each package, and listen to demos here.
If you have any questions, feel free to connect with us directly—we’re here to help!
|
|
|
|
|
|
|
|
|
|
|
|
Forums65
Topics83,536
Posts758,919
Members39,145
| |
Most Online3,932
Nov 19th, 2024
|
|
|
|
|
|
|
|
|
Dansk
Deutsch - Windows
Español
Français - Windows
Italiano - Windows
Nederlands
Polski
Português
Svenskt
русский
Japanese
Simplified Chinese
Traditional Chinese
Korean